AVEMAX Bed Type Milling Machine

  • CB-170
  • CB-180
  • CB-185
  • CB-850
  • CB-1000
  • CB-1300
  • CB-1600
  • Enquire Now
  • NST#30/R8 spindle with 3HP variable speed motor (inverter motor option is available).
  • Essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
  • Standard with 10” X 54” table with hardened and ground.
  • Table T-slot is precision ground to exact tolerance.
  • Precision ballscrews are equipped on X and Y axes.
  • X&Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways are hardened and ground for wear resistance and excellent longevity.
Specification CB-170
Table Size 1370 x 250mm
T slots of table (number x width) 3 x 15.875mm
Longitudinal travel 830mm
Cross travel 500mm
Vertical travel 450mm
Quill travel 127mm
Spindle nose to table surface 150~600/95~54mm
Head swivel (R&L) 45°
Spindle motor 3HP (Variable speed)
Spindle taper NSP#30 (Opt. NST#40)
Spindle speed 60HZ 60~4500/50HZ 50~3800
Quill feed rate 0.04~0.08~0.14
Spindle to columm surface 465mm
XY feed rates 0~3000mm/min
XY rapid traverse 5000mm/min
Length x Width x Height 2200 x 1900 x 2550mm
Net weight 2000Kgs
  • NST#40 spindle (material SCM415 full hardened through carbonizing heat treatment) with 5HP variable speed motor (inverter motor option is available).
  • Essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
  • Standard with 10” X 54” table with hardened and ground.
  • Table T-slot is precision ground to exact tolerance.
  • Precision ballscrews are equipped on X and Y axes. 
  • X&Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways are hardened and ground for wear resistance and excellent longevity.
Specification CB-180
Table Size 1370 x 250mm
T slots of table (number x width) 3 x 15.875mm
Longitudinal travel 830mm
Cross travel 500mm
Vertical travel 450mm
Quill travel 127mm
Spindle nose to table surface 150~600/67~425mm
Head swivel (R&L) 45°
Spindle motor 5HP (Variable speed)
Spindle taper NST#40
Spindle speed 60HZ 60~4500/50HZ 50~3600
Quill feed rate 0.04~0.08~0.14
Spindle to columm surface 500mm
XY feed rates 0~3000mm/min
XY rapid traverse 5000mm/min
Length x Width x Height 2200 x 1900 x 2580mm
Net weight 2100Kgs
  • NST#40 spindle with 5HP inverter motor.
  • Spindle material is SCM415 full hardened through carbonizing heat treatment.
  • Essential castings are made of high grade of Meehanite cast iron, which has been stressed, relieved to provide a rigid machine structure.
  • Standard with 10” X 54” table with hardened and ground.
  • Table T-slot is precise ground for precise tolerance.
  • Precise ballscrews are equipped on X&Y axes.
  • X Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways are hardened and ground for wear resistance and excellent longevity.
  • 1:2 ratio timing belt pulleys on XY axes to increase drive torque.
Specification CB-185
Table Size 1270 x 305mm
T slots of table (number x width) 3 x 15.875mm
Longitudinal travel 985mm
Cross travel 450mm
Vertical travel 450mm
Quill travel 127mm
Spindle nose to table surface 150~600/67~425mm
Head swivel (R&L) 45°
Spindle motor 5HP (Variable speed)
Spindle taper NST#40
Spindle speed 75~5000
Quill feed rate 0.04~0.08~0.14
Spindle to columm surface 500mm
XY feed rates 0~3000mm/min
XY rapid traverse 5000mm/min
Length x Width x Height 2200 x 1900 x 2600mm
Net weight 2300Kgs
  • Comes standard with EVS head.
  • Precise ballscrews are equipped on X and Y axes.
  • Equipped with 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque and reduce the cost of axes motors.
  • NST#40 spindle with 5HP inverter motor.
  • Spindle material is SCM415 full piece by hardened and ground.
  • Essential castings are made of high grade of Meehanite cast iron, which has been stressed, relieved to provide a rigid machine structure.
  • Dovetail design on X slideway, and box way design on YZ slideways.
  • Precise ballscrews are equipped on X and Y axes. XY slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways, table and T-slot are hardened and ground for wear resistance and excellent longevity.
  • Equipped with 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque and reduce the cost of axes motors.
  • YZ slideways are protected by high grade steel covers.
Specification CB-850
Table Size 1270 x 305mm
T slots of table (number x width) 3 x 16mm
Longitudinal travel 850mm
Cross travel 450mm
Vertical travel 450mm
Quill travel 140mm
Spindle nose to table surface 85~585mm
Head swivel (R&L) 45°
Spindle motor 5HP
Spindle taper NST#40
Spindle speed 5000RPM
Quill feed rate 0.035~0.07~0.14mm/min
Spindle to columm surface 510mm
XY feed rates 0~750mm/min
XY rapid traverse 7.5m/min
Length x Width x Height 2170 x 1975 x 2474mm
Net weight 2100Kgs
  • Strong back gear transmutation instead of timing belt for Hi-Low speed.
  • NST#40 spindle with 5HP inverter motor.
  • Headstock is transmitted by strong back gears instead of timing belt for Hi-Low speeds.
  • Spindle material SCM415 (SAE4115) fully hardened &precision ground.
  • High grade of Meehanite cast iron is used on column, saddle, base and table, which are stressed relieved to avoid any distortion.
  • Dovetail design on X slideway, and box way construction on YZ slideways.
  • Precise ballscrews are equipped on X and Y axes. X and Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways, table and T-slot are hardened and ground for wear resistance and excellent longevity.
  • 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque.
  • YZ slideways are protected by high grade steel covers.
Specification CB-1000
Table Size 1520 x 400mm
T slots of table (number x width) 3 x 16mm
Longitudinal travel 1070mm
Cross travel 510mm
Cross travel 510mm (Opt.650mm)
Quill travel 140mm
Spindle nose to table surface 85~585mm
Head swivel (R&L) 45°
Spindle motor 5HP
Spindle taper NST#40
Spindle speed 5000RPM
Quill feed rate 0.035~0.07~0.14mm/min
Spindle to columm surface 525mm
XY feed rates 0~750mm/min
XY rapid traverse 7.5m/min
Length x Width x Height 2380 x 2200 x 2550mm
Net weight 2600Kgs
  • Strong back gear transmutation instead of timing belt for Hi-Low speed.
  • NST#40 spindle with 5HP inverter motor.
  • Headstock is transmitted by strong back gears instead of timing belt for Hi-Low speeds.
  • Spindle material SCM415 (SAE4115) fully hardened &precision ground.
  • High grade of Meehanite cast iron is used on column, saddle, base and table, which are stressed relieved to avoid any distortion.
  • Dovetail design on X slideway, and box way construction on YZ slideways.
  • Precise ballscrews are equipped on X and Y axes. X and Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways, table and T-slot are hardened and ground for wear resistance and excellent longevity.
  • 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque.
  • YZ slideways are protected by high grade steel covers.
Specification CB-1300
Table Size 1800 x 450mm
T slots of table (number x width) 3 x 16mm
Longitudinal travel 1300mm
Cross travel 600mm
Vertical travel 700mm
Quill travel 140mm
Spindle nose to table surface 85~585mm
Head swivel (R&L) 45°
Spindle motor 5HP
Spindle taper NST#40
Spindle speed 5000RPM
Quill feed rate 0.035~0.07~0.14mm/min
Spindle to columm surface 580mm
XY feed rates 0~750mm/min
XY rapid traverse 12m/min
Length x Width x Height 2750 x 2435 x 2930mm
Net weight 3960Kgs
  • Strong back gear transmutation instead of timing belt for Hi-Low speed.
  • NST#40 spindle with 5HP inverter motor.
  • Headstock is transmitted by strong back gears instead of timing belt for Hi-Low speeds.
  • Spindle material SCM415 (SAE4115) fully hardened &precision ground.
  • High grade of Meehanite cast iron is used on column, saddle, base and table, which are stressed relieved to avoid any distortion.
  • Dovetail design on X slideway, and box way construction on YZ slideways.
  • Precise ballscrews are equipped on X and Y axes. X and Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • XYZ slideways, table and T-slot are hardened and ground for wear resistance and excellent longevity.
  • 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque.
  • YZ slideways are protected by high grade steel covers.
Specification CB-1600
Table Size 2200 x 500mm
T slots of table (number x width) 3 x 16mm
Longitudinal travel 1600mm
Cross travel 700mm
Vertical travel 700mm
Quill travel 140mm
Spindle nose to table surface 85~585mm
Head swivel (R&L) 45°
Spindle motor 5HP
Spindle taper NST#40
Spindle speed 5000RPM
Spindle speed 0.035~0.07~0.14mm/min
Spindle to columm surface 670mm
XY feed rates 0~750mm/min
XY rapid traverse 12m/min
Length x Width x Height 3200 x 2530 x 2910mm
Net weight 4500Kgs