- B410 / B410VS
- MBG-1300
- MBG-1600
- Enquire Now
Features
- 5HP strong head can be swiveled 90 degrees right and left for angular machining.
- Quill diameter 110mm(4.3”). NST#40 spindle.
- XY axes high precision ballscrews, Z axis leadscrew (Z axis ballscrew by option).
- Heavy duty saddle length 1200mm (47.2”) support to table.
- Rigid square ways on cross and column.
- Licensed Meehanite casting.
- Hardened and ground on X Y Z slideways and table.
- Turcite-B coated on X Y Z axes slideways and gibs.
- Counter-balance weight device for milling head.
- Telescopic steel cover to protect the sildeways and ballscrew from dust.
Technical Specifications
Specification | B410 / B410VS | |
---|---|---|
Table | ||
Table Size | 1270 x 380 mm | |
T slots of table (Qty x size) | 3 x 16 mm | |
Longitudinal travel (Manual) | 1000 mm | |
Longitudinal travel (Auto) | 1000 mm (Option: 1200 mm) | |
Cross travel | 500 mm | |
Quill travel | 500 mm | |
Spindle to table nose (D) | 140~600 mm | |
Spindle | ||
Spindle taper | NST#40 | |
Spindle speed (rpm) | Step head | 50 Hz low: 62~416 High: 458~3000 60 Hz low: 75~500 High: 550~3600 |
Variable speed head | low: 0~480 High: 0~3600 | |
Stroke of quill on turret | 140 mm | |
Quill feeds (mm/rpm) | 0.035 mm~0.07 mm~0.14 mm | |
Head swivel (R&L) | 45o | |
Spindle to column (E) | 490mm | |
Feed Rate | ||
X Y Z axes feed rates (mm/min) | 0~1800 mm (0~7 1”) Adjustable Steplessly | |
Rapid traverse X Y axes (mm/min) | 1800 | |
Rapid traverse of Z axis (mm/min) | 900 | |
Motor | ||
Spindle drive motor | 5HP | |
Drive on X axis | 1HP servo motor for B410(VS)-SP | |
Drive on Y axis | 1/2 HP reduction motor with inverter driver for B410(VS)-FP | |
Drive on Z axis | ||
Coolant pump | 1/6HP | |
Length x Width x Height (A x B x C) | 2250 mm x 2050 mm x 2090 mm | |
Net weight | 3100 gs |
Features
- High-rigidity spindle completed with roller bearing design for accurate cutting. No chatter happens during cutting process.
- Gears, spindle shaft and key are made from chrome molybdenum steel SCM415H. Grade JIS 1 carburizing harden and precise grinding to ensure running precision and long duration.
- Gear box is lubricated by forced lubrication system.
- High grade casting is annealed and stress-released, providing high rigidity and wear resistance.
- Hardened and ground double-nut ballscrews on 3 axes, providing high precision movement, and reducing heat deformation.
- XYZ slideways, table and T-slot are hardened and ground.
- 3 ways are coated with turcite-B.
- Dovetail on X slideways, box ways on Y and Z.
- 1:2 ratio timing belt boxes on XYZ to increase drive torque and save cost for axes motors.
- XYZ axes are driven by servo motor, standard with pendent control box, and individual buttons for each function allows operator to work with ease.
- YZ steel way covers protecting slidways and ballscrews from dust and coolant.
Technical Specifications
Specification | MBG-1300 |
---|---|
Table size (L x W) | 1800 x 450 mm (70.87″x17.72″) |
T-slot (Number x Size) | 18 x 5 x 70 mm (0.71”x0.20”x2.76”) |
Longitudinal travel | 1300 mm (51.18”) |
Cross travel | 600 mm (23.62”) |
Vertical travel | 700 m (27.56”) |
Table load capacity | 800kgs |
Spindle nose to table surace | 100~800 mm (3.937”~31.50”) |
Spindle | |
Spindle taper | NST#50 Gear head |
Spindle speed | 50Hz Low: 104~466 High: 308~1400 60Hz Low: 125~560 High: 370~1100 |
Spindle speed step | 6 steps |
Spindle center to column surface | 610 mm (24.02”) |
Feed rate | |
XYZ axes feed rate | 0~750 mm/min (0”~29.53”) |
Rapid traverse XYZ axes | 12M |
Motor | |
Spindle motor | 10 HP |
X,Y,Z motors | DC 800W |
Coolant pump | 1/6 HP |
Air Press | 6 kg / cm2 |
Power needed | 12 kw |
Machine Length (A) | 2930 mm (115.35”) |
Machine width (B) | 2750 mm (108.27”) |
Machine height (C) | 2435 mm (95.87”) |
Net weight | 3960 kgs (8730lbs) |
Features
- Gear box is lubricated by forced lubrication system.
- Gears, spindle shaft and key are made from chrome molybdenum steel SCM415H.
- Grade JIS 1 carburizing harden and precise grinding to ensure running precision and long duration.
- High grade casting is annealed and stress-released, providing high rigidity and wear resistance.
- Hardened and ground double-nit ballscrews on 3 axes, providing high precision movement, and reduce heat deformation.
- XYZ slideways, table and T-slot are hardened and ground.
- Dovetail on X slideways, box ways on Y and Z.
- 3 ways are coated with turcite-B.
- 1:2 ratio timing belt boxes on XYZ to increase drive torque and save cost for axes motor.
- XYZ axes driven by servo motor, standard with pendant control box, and individual buttons for each function allows the operator to work with ease.
- YZ steel way covers protecting slideways and ballscrew from dust and coolant.
Technical Specifications
Specification | MBG-1600 |
---|---|
Table size (L x W) | 2200 x 500 mm (86.61″ x 19.69″) |
T-slot (Number x Size) | 18 x 5 x 85 mm (0.71” x 0.20” x 3.35”) |
Longitudinal travel | 1600 mm (62.99”) |
Cross travel | 700 mm (27.56”) |
Vertical travel | 700 mm (27.56”) |
Table load capacity | 1000 kgs |
Spindle nose to table surace | 70~770 mm (2.76”~30.31”) |
Spindle | |
Spindle taper | NST#50 Gear head |
Spindle speed | 50Hz Low: 104~466 High: 308~1400 60Hz Low: 125~560 High: 370~1100 |
Spindle speed step | 6 steps |
Spindle center to column surface | 700 mm (27.56”) |
Feed rate | |
XYZ axes feed rate | 0~750 mm/min (0”~29.53”) |
Rapid traverse XYZ axes | 12 M |
Motor | |
Spindle motor | 10 HP |
X,Y,Z motors | DC 1200W |
Coolant pump | 1/6 HP |
Air Press | 6 kg / cm2 |
Power needed | 12 kw |
Machine Length (A) | 2930 mm (115.35”) |
Machine width (B) | 3200 mm (125.98”) |
Machine height (C) | 2530 mm (99.61”) |
Net weight | 4500 kgs (9921lbs) |