AVEMAX Bed Type Machining Center
Features
- VMC rigid headstock moves directly on column without extra bracket to ensure heavy cutting accuracy.
- BT40 spindle is fully balanced for low chatter and high performance machining.
- All essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
- All three axes are driven by high precision ballscrews with double nuts which leads less play and backlash.
- Dovetail design on X, box way design on YZ.
- All slideways have been hardened and ground for longer longevity. It also provides high rigidity for heavy and discontinuously cutting.
- All contacting surfaces are precisely hand scrapped.
- YZ slideways are protected by high grade steel covers.
- 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque and save the cost of axes motors.
Technical Specifications
| Specification | MCB-850 |
|---|---|
| Table size | 1270 x 305mm |
| T slot of spindle (number x width) | 3 x 16mm |
| Longitudinal travel | 850mm |
| Cross travel | 450mm |
| Vertical travel | 450mm |
| Table load capacity | 400Kgs |
| Spindle taper | 150~600mm (Opt. 150~750mm) |
| Spindle speed | BT40 |
| Spindle motor | 8000RPM |
| Spindle center to column front surface | 7.5HP |
| Ram travel | 510mm |
| XYZ axis motor | 1Kw AC Servo |
| XYZ axis feed rate | 0~750mm/min |
| Rapid traverse XYZ axes | 7.5m/min |
| coolant pump | 1/4HP |
| Length x Width x Height | 2170 x 1975 x 2474mm |
| Net weight | 2100Kgs |
Features
- VMC rigid headstock moves directly on column without extra bracket to ensure heavy cutting accuracy.
- BT40 spindle is fully balanced for low chatter and high performance machining.
- All essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
- All three axes are driven by high precision ballscrews with double nuts which leads less play and backlash.
- Dovetail design on X, box way design on YZ.
- All slideways have been hardened and ground for longer longevity. It also provides high rigidity for heavy and discontinuously cutting.
- All contacting surfaces are precisely hand scrapped.
- YZ slideways are protected by high grade steel covers.
- 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque and save the cost of axes motors.
Technical Specifications
| Specification | MCB-1000 |
|---|---|
| Table size | 1520 x 400mm |
| T slot of spindle (number x width) | 3 x 18mm |
| Longitudinal travel | 1070mm |
| Cross travel | 510mm |
| Vertical travel | 510mm (Opt.650mm) |
| Table load capacity | 500Kgs |
| Spindle taper | 100~610mm |
| Spindle taper | BT40 |
| Spindle motor | 8000RPM |
| Spindle center to column front surface | 10HP |
| Ram travel | 525mm |
| XYZ axis motor | 1Kw AC Servo |
| XYZ axis feed rate | 0~750mm/min |
| Rapid traverse XYZ axes | 12m/min |
| coolant pump | 1/4HP |
| coolant pump | 2380 x 2200 x 2550mm |
| Net weight | 2600Kgs |
Features
- VMC rigid headstock moves directly on column without extra bracket to ensure heavy cutting accuracy.
- BT40 spindle is fully balanced for low chatter and high performance machining.
- All essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
- All three axes are driven by high precision ballscrews with double nuts which leads less play and backlash.
- Dovetail design on X, box way design on YZ.
- All slideways have been hardened and ground for longer longevity. It also provides high rigidity for heavy and discontinuously cutting.
- All contacting surfaces are precisely hand scrapped.
- YZ slideways are protected by high grade steel covers.
- 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque and save the cost of axes motors.
Technical Specifications
| Specification | MCB-1300 |
|---|---|
| Table size | 1800 x 450mm |
| T slot of spindle (number x width) | 5 x 18mm |
| Longitudinal travel | 1300mm |
| Cross travel | 600mm |
| Vertical travel | 700mm |
| Table load capacity | 800Kgs |
| Spindle taper | 150~850mm |
| Spindle speed | BT40 |
| Spindle motor | 8000RPM |
| Spindle center to column front surface | 10HP |
| Ram travel | 580mm |
| XYZ axis motor | 1Kw AC Servo |
| XYZ axis feed rate | 0~750mm/min |
| Rapid traverse XYZ axes | 12m/min |
| coolant pump | 1/4HP |
| Length x Width x Height | 2750 x 2435 x 2930mm |
| Net weight | 3960Kgs |
Features
- VMC rigid headstock moves directly on column without extra bracket to ensure heavy cutting accuracy.
- BT40 spindle is fully balanced for low chatter and high performance machining.
- All essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
- All three axes are driven by high precision ballscrews with double nuts which leads less play and backlash.
- Dovetail design on X, box way design on YZ.
- All slideways have been hardened and ground for longer longevity. It also provides high rigidity for heavy and discontinuously cutting.
- All contacting surfaces are precisely hand scrapped.
- YZ slideways are protected by high grade steel covers.
- 1:2 ratio timing belt pulleys on XYZ axes to increase drive torque and save the cost of axes motors.
Technical Specifications
| Specification | MCB-1600 |
|---|---|
| Table size | 2200 x 500mm |
| T slot of spindle (number x width) | 5 x 18mm |
| Longitudinal travel | 1600mm |
| Cross travel | 700mm |
| Vertical travel | 700mm |
| Table load capacity | 1000Kgs |
| Spindle taper | 120~820mm |
| Spindle speed | BT40 |
| Spindle motor | 8000RPM |
| Spindle center to column front surface | 10HP |
| Ram travel | 670mm |
| XYZ axis motor | 2Kw AC Servo |
| XYZ axis feed rate | 0~750mm/min |
| Rapid traverse XYZ axes | 12m/min |
| coolant pump | 1/4HP |
| Length x Width x Height | 3200 x 2530 x 293mm |
| Net weight | 4500Kgs |