AVEMAX Super Precision
SP-150VS/SP-520VS

  • SP-150VS
  • SP-520VS
  • Enquire Now
  • 9”X 49” table.
  • R8 (NST#30) spindle material SCM415 (SAB4115) with hardened and ground.
  • Turcite-B on X Y ways, slidways and gibs.
  • Hardened and ground table with ground T-slots.
  • Electroless nickel-phosphorus plating process on X and Y leadscrews.
  • Patented FA381 keys are used for vari-speed head.
  • 1-1/4”(32mm) diameter lifting screw.
  • Leveling screws and pads on base.
  • Strict with hand scraping for high precise accuracy.
Specification SP-150VS
Table size 230×1245 mm (9”x49”)
T-slot of table (Q’ty x size) 3×16 mm (3×0.629”)
Longitudinal travel (X axis) Manual 930 mm (36.6”)
Auto 850 mm (33.5”)
Cross travel (Y axis) 305 mm (12.007”)
Vertical travel of knee (Z axis) 406 mm (15.984”)
Ram travel 356 mm (14”)
Quill travel 127 mm (5”)
Spindle taper NST#30/R8 (Opt. NST#40)
Spindle to table nose 34~440 mm( 1.34”~17.32”)
Spindle center to column 154~544 mm (6”~21.4”)
Over swivel on turret 360゜
Head swivel (R&L) +/-45゜
Head tilt (up&down) +/-45゜
Spindle motor 3HP
X axis motor Option: Power feed
Lifting motor Nil
Quill feed 0.04~0.08~0.14 mm/rpm (0.0015” ~ 0.003” ~ 0.006”)
Spindle speed Step head 50Hz low: 66~270 High: 550~227060Hz low: 80~325 High: 660~2720
Variable speed head 50Hz low: 50~420 High: 420~3750
60Hz low: 60~500 High: 500~4500
Overall height 2140mm (82.874”)
Overall depth 1618mm (63.7”)
Overall width 1497mm (58.937”)
Net weight 950Kgs (2200lbs)
  • 10X 54” table 
  • NST#40 spindle material SAE4115 (SCM415) full piece by hardened and ground 
  • Turcite-B on X Y ways, slidways and X Y gibs 
  • Hardened and ground on X Y Z slidways and table
  • Electroless nickel-phosphorus plating process on X and Y leadscrews
  • Grinding on table T-slot
  • Square ways on Y and column ways
  • Patented FA381 keys are used for vari-speed head
  • Diameter 1 1/2” (38mm) lifting screw
  • Lifting motor and electric box
  • Strict with hand scraping for high precise accuracy.
Specification SP-520VS
Table size 250x1370mm (10”x54”)
T-slot of table (Q’ty x size) 3x16mm (3×0.629”)
Longitudinal travel (X axis) Manual 870mm (34”)
Auto 775mm (30.5”)
Cross travel (Y axis) 410mm (16.141”)
Vertical travel of knee (Z axis) 450mm (17.716”)
Ram travel 560mm (22”)
Quill travel 127mm (5”)
Spindle taper NST#40
Spindle to table nose 85~535mm (3.3”~21”)
Spindle center to column 178~738mm (7”~29”)
Over swivel on turret 360゜
Head swivel (R&L) +/-45゜
Head tilt (up&down) Option
Spindle motor 5HP
X axis motor Option: Power feed
Lifting motor 1HP gear type motor
Quill feed 0.04~0.08~0.14 mm / rpm (0.0015” ~ 0.003” ~ 0.006”)
Spindle speed Step head 50Hz low: 54~330 High: 470~287560Hz low: 65~400 High: 570~3450
Variable speed head 50Hz low: 50~415 High: 415~360060Hz low: 60~500 High: 500~4300
Overall height 2375mm (93.5”)
Overall depth 2120mm (83.5”)
Overall width 1840mm (72.4”)
Net weight 1600Kgs (3520lbs)