AVEMAX Vertical Turret Milling Machine

  • CV-400
  • CV-520
  • Enquire Now
  • Spindle material is SCM415 full hardened through carbonizing heat treatment
  • NST#30/R8 spindle with 3HP variable speed motor (inverter motor option is available).
  • Spindle quill drive box is transmitted by ballscrew for better precision.
  • Essential castings are made of high grade of Meehanite cast iron, which has been stressed and relieved to provide a rigid machine structure.
  • Standard with 10” X 54” table with hardened and ground.
  • Table T-slot is precision ground to exact tolerance.
  • Precision ballscrews are equipped on X&Y axes.
  • X and Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • 1:2 ratio timing belt pulleys on XY axes to increase drive torque.
Specification CV-400
Table size 1370 × 250mm
T-slot (NumberxWidth) 3 × 15.875mm
Longitudinal 830mm
Cross travel 380mm
Travel of Knee 355mm
Travel of Z axis (Quill) 127mm
Ram travel 560mm
Table to spindle nose 150~505mm
Over swivel on turret 360°
Head swivel (R&L) 45°
Head tilt (up&down) 45°
Spindle to column 159~719mm
Spindle motor 3HP
Spindle taper NST#30 (NST#40 option)
Quill feeds 0.04~0.08~0.14mm
Spindle speeds (rpm) 60HZ 60~4500rpm
50HZ 50~3800rpm
Longitudinal/Cross feed rates 0~3000mm/min
Rapid traverse on XY 5000mm/min
Overall height 2120mm
Overall depth 1850mm
Overall width 1900mm
Net weight 1400Kgs
  • Spindle material is SCM415 full hardened through carbonizing heat treatment.
  • NST#40 spindle with 5HP variable speed motor (inverter motor option is available).
  • Spindle quill drive box is transmitted by ballscrew for better precision.
  • Essential castings are made of high grade of Meehanite cast iron, which has been stressed, relieved to provide a rigid machine structure.
  • Standard with 10” X 54” table with hardened and ground.
  • Table T-slot is precision ground to exact tolerance.
  • Box way design on Y and Z axes leads to better rigidity.
  • Lifting screw diameter 38mm assures the stability while machining.
  • Precision ballscrews are equipped on X&Y axes.
  • X&Y slideways and gibs are coated with Turcite-B to provide smooth and wear resistant surface.
  • 1:2 ratio timing belt pulleys on XY axes to increase drive torque.
Specification CV-520
Table size 1370 × 250mm
T-slot (NumberxWidth) 3 × 15.875mm
Longitudinal 830mm
Cross travel 405mm
Travel of Knee 378mm
Travel of Z axis (Quill) 127mm
Ram travel 560mm
Table to spindle nose 150~528mm
Over swivel on turret 360°
Head swivel (R&L) 45°
Head tilt (up&down) Nil (Opt.45°)
Spindle to column 168~730mm
Spindle motor 5HP
Spindle taper NST#40
Quill feeds 0.04~0.08~0.14mm
Spindle speeds (rpm) 60HZ 60~4500rpm
50HZ 50~3800rpm
Longitudinal/Cross feed rates 0~3000mm/min
Rapid traverse on XY 5000mm/min
Overall height 2375mm
Overall depth 1850mm
Overall width 1900mm
Net weight 1800Kgs