SUPER TURN
High Speed Precision Lathes
SUPER TURN
Features
HO – 460×800/1100/1500/2000
Technical Specifications
| HO-460 | ||
|---|---|---|
| Capacity | swing over bed m/m | ø460 (18.11″) |
| swing over cross slide m/m | ø280 (11″) | |
| swing in gap m/m | ø620 (24.4″) | |
| gap width in front of face plate m/m | 200 (7.87″) | |
| distance between centers m/m | 800 (31.49″) / 1100 (43.30″) /1500(59.05″) / 2,000 (78.74″) | |
| width of bed m/m | 350 (13.77″) | |
| total travel of top slide m/m | 150 (5.9″) | |
| height of center from leg bottom m/m | 1090 (43″) |
Features
HO – 560×800/1100/1500/2000/3000
Technical Specifications
| HO-560 | ||
|---|---|---|
| Capacity | swing over bed m/m | Ø560 (22″) |
| swing over cross slide m/m | Ø390 (15.35″) | |
| swing in gap m/m | Ø730 (28.74″) | |
| gap width in front of face plate m/m | 200(7.87″) | |
| distance between centers m/m | 800 (31.49″) / 1100 (43.30″) /1500(59.05″) / 2,000 (78.74″)/ 3,000 (118.1″) | |
| width of bed m/m | 350 (13.77″) | |
| total travel of top slide m/m | 150 (5.9″) | |
| height of center from leg bottom m/m | 1140 (44.9″) |
Features
HO – 660×800/1100/1500/2000/3000
Technical Specifications
| HO-660 | ||
|---|---|---|
| Capacity | swing over bed m/m | Ø660 (26″) |
| swing over cross slide m/m | Ø540 (21.5″) | |
| swing in gap m/m | Ø840 (33.33″) | |
| gap width in front of face plate m/m | 200(7.87″) | |
| distance between centers m/m | 800 (31.49″) / 1100 (43.30″) /1500(59.05″) / 2,000 (78.74″)/ 3,000 (118.1″) | |
| width of bed m/m | 350 (13.77″) | |
| total travel of top slide m/m | 150 (5.9″) | |
| height of center from leg bottom m/m | 1190 (46.9″) |
Features
HO – 430×700/1000/1700
FEATURES:
- Machine body is made of high rigidity cast iron (FC 25) so that the slide ways will be durable and won’t be transformed forever.
- Spindle and gears in spindle housing are all made of chrome molybdenum steel which are hardened and grounded. Spindle is supported by high precision roller bearings put three points on the spindle. So, its rigidity is higher.
- Gears of gear box are dipped with oil in a closed box making it easier and more convenient to change speeds. Can make threads such as imperial, metric, diametral, pitch and module.
- Apron is oil dipped, too. Cross and longitudinal feeding are all equipped with a safety device.
- Tailstock with bigger body can produce heavy duty cutting. Locks firmly to prevent from slipping when center feeding.
Technical Specifications
| 430×700 | 430×1000/1700 | ||
|---|---|---|---|
| Capacity | Height of centers Swing over bed Swing over cross slide Width of bed |
215［8”］ 434［17”］ 270［11”］ 300［12”］ |
|
| Spindle | Hole through spindle & spindle nose Spindle speeds (rpam) Center |
54［A1 – 6］ 78 – 1800 MT4 |
|
| Feeds & Threads |
Range of longitudinal/Cross feeds (32step) Imperial threads (32 step) Metric threads(32 step) |
0.06 – 0.83 4 – 56TPI 0.4 – 7P |
|
| Carriage | Travel of cross slide Travel of top slide |
270 130 |
|
| Tailstock | Travel of tailstock sleeve Center of tailstock |
165 MT4 |
|
| MOTORS | Spindle drive motor | 3 HP | |
| MACHINE DIMENSIONS AND WEIGHT | KGSpace required (L×W×H)m/m Packing dimensions(L×W×H)m/m Net weight (approximate) |
1750×750×1200 1860×810×1520 1000kg |
2050/2620×750×1200 2190/2690×810×1520 1100/1300kg |