Features
- 30 HP, 230V/460V, 3 Phase, 60 Cycle Motor, Switch and Wiring Complete
- Spindle Bore: HP 7.09” / HPX 9.25” or 10.1″
- Spindle Nose: ASA-A2-15
- 16 Spindle Speeds: 8 – 700 RPM (HP), 9 – 600 RPM (HPX)
- Headstock Spindle Adaptor: ASA-450 to MT#6
- Hydraulic Brake System
- 4-Way Rapid Traverse
- T-Slot on Tool Slide
- Hardened and Ground Bed and Cross Slide Ways
- 2-Speed Drive Tailstock Quill
- Coolant System with Pump and Piping
- Pull Drawer Chip (Coolant) Pan
- Rear Chuck Adapter Installed
- Front & Rear Chuck Guards
Technical Specifications
Capacity | 34″ | 40″ |
---|---|---|
Swing Over Bed | 34” | 40” |
Swing Over Cross Slide | 25.1” | 31.0” |
Distance Between Centers | 80” / 120” / 160” / 200” / 240” / 280” | 80” / 120” / 160” / 200” / 240” / 280” |
Width of Bed | 22” | 22” |
Height of Center from Leg Bottom | 48.6” | 51.5″ |
Headstock | 34″ | 40″ |
---|---|---|
Spindle Bore | HP 7.09” / HPX 9.25” or 10.1” | HP 7.09” / HPX 9.25” or 10.1” |
Type of Spindle Nose | ASA A2-15 | ASA A2-15 |
Number of Spindle Speeds | 16 | 16 |
Spindle Speeds | 8 – 700 RPM (HP), 9 – 600 RPM (HPX) | 8 – 700 RPM (HP), 9 – 600 RPM (HPX) |
Gear Box | 34″ | 40″ |
---|---|---|
Number of Feed Changes | 40 Kinds | 40 Kinds |
Range of Long. Feeds per Rev. | 0.0024” – 0.0337” | 0.0024” – 0.0337” |
Longitudinal Cross | 1/2 of Longitudinal Feed | 1/2 of Longitudinal Feed |
Leadscrew Diameter & Threads per Inch | 1.9” / 2 TPI | 1.9” / 2 TPI |
Threading Range – Whitworth | 1 to 28 TPI (50) | 1 to 28 TPI (50) |
Threading Range – Metric | 1 to 28mm pitch (41) | 1 to 28mm pitch (41) |
Threading Range – Module | 0.5 to 7 M (20) | 0.5 to 7 M (20) |
Threading Range – D.P. | 4 to 56 D.P. (40) | 4 to 56 D.P. (40) |
Tool Slide | 34″ | 40″ |
---|---|---|
Maximum Travel of Compound | 9.4” | 9.4” |
Maximum Travel of Cross Slide | 21.2” | 21.2” |
Tailstock | 34″ | 40″ |
---|---|---|
Tailstock Quill Travel | 11.8” | 11.8” |
Tailstock Quill Diameter | 5.1” | 5.1” |
Tailstock Center | M.T. #6 | M.T. #6 |
Motor | 34″ | 40″ |
---|---|---|
Main Drive Motor | 30 HP (22kw) | 30 HP (22kw) |
Coolant Pump Motor | 1/4 HP | 1/4 HP |
Dimensions | 34″ | 40″ |
---|---|---|
Floor Space (L x W) | 198″ / 238″ / 278″ / 316″ / 360″ / 394″ x 87″ | 198″ / 238″ / 278″ / 316″ / 360″ / 394″ x 87″ |
Weight (lbs) | 34″ | 40″ |
---|---|---|
13,700 / 15,200 / 17,800 / 19,300 / 21,800 / 23,900 | 13,950 / 15,500 / 18,000 / 19,600 / 22,100 / 24,200 |
Enquire Now